How do I update the firmware?

Make sure you have the latest version of the Inmotion Bluetooth application. (latest version for IOS and latest version for Android).
Connect the electric unicycle to the mains, switch it on and put the wheel in park mode (see photo). To do this, press the motor cut-off button, tilt the wheel backwards until the headlight stops upwards, then release the motor cut-off button.
Connect to your electric unicycle via Bluetooth. In the “Vehicle” tab, click on the small cogwheel in the top right-hand corner “Specifications”. At the bottom of this page, click on “Upgrade FM” to update your firmware.

If the LEDs start flashing red after the update, don’t panic! This simply means that you need to calibrate your electric unicycle.

To do this, please follow the procedure below: calibration or “SCV correction”.
Make sure you have the latest version of the Inmotion Bluetooth application and that you have carried out the latest firmware update.
Connect the unicycle to the mains, switch it on and place the wheel in park mode (see photo). To do this, press the motor cut-off button, tilt the wheel backwards until the headlight stops upwards, then release the motor cut-off button.
Connect to your electric unicycle via Bluetooth.
In the “Vehicle” tab, click on the small cogwheel in the top right-hand corner “Specifications”.
At the bottom of this page, click on “SCV correction” and then on “Car body turning and fowarding correction”.